PNY P-DSA2-PCIE-RF Bedienungsanleitung PDF herunterladen (Seite 11)

Aug/07 MN2036400001

10. When asked Are you sure to exit(Y/N)?, press Y to exit and

reboot.

Deleting RAID Arrays

1. As the BIOS boots press Ctrl+S or F4 when prompted to enter

the RAID BIOS.

2. Select Delete RAID Set, then press Enter.

3. Select the RAID set then press Enter.

4. When asked Are You Sure(Y/N)?, press Y to confirm.

Resolving Conflicts

When a RAID set is created, then metadata written to the disk includes

drive connection information. If, after a disk failure, the replacement

disk was previously part of a RAID set (or used in another system), it

may have conflicting metadata. If so, this will prohibit the RAID set

from being either created or rebuilt, in order for the RAID set to

function properly; this old metadata must be first overwritten with the

new metadata. To resolve this, from the main BIOS window select

Resolve Conflicts, then press Enter, the correct metadata, including

the correct drive connection information, will be written to the

replacement disk.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Keine Kommentare

PNY P-DSA2-PCIE-RF Bedienungsanleitung Seite 11